Public Environment - G support

G-support for both nailing and gluing, pick and choose! The curb has a height of 10 cm, with a rather sharp angle at the front. In the case of new...

Straight G support of type B. Mounted mostly along sidewalks, parking lots, refuges and dividing strips. The G-support is manufactured with reinfo...

G-support type C is the smallest glue stone in the G-support family. It is often called a garden curb thanks to its neat design. The stone has no f...

The strongest adhesive kerb developed to be used for roads with heavier traffic. The stone is 16 cm high, has a small heel on the back and only a s...

Extra adhesive strip for your G-Stöds. This is used with advantage on uneven and older substrates where extra adhesive strength is needed. The str...

Nail that fastens G-support where the glue is not enough. The nails are fixed in the holes on the lower heel of the G-support. G-Stödsspik comes i...

The G-support for those who build on, for example, a parking lot with a slope of a few degrees. The drainage is important so that rainwater & ...

G-support type A2 convex R6-12 is a curb stone that has a radius of 12.0 (straight), but with angled short sides that allow you to create radii fro...

G-support type A3 concave R6-12 is a straight edge support, with angled short sides that allow you, with several in a row, to build radii up to 6....

G-support type A4 convex R4.5 has a natural gray color and is often mounted on pavements, refuges, parking spaces and dividing strips. It has a he...

This variant is used, for example, at pedestrian crossings where a lower edge is required. The product is part of the A series, which by default ha...

A type A concrete curb with a radius of 4.5m. Often installed as a pavement, in parking lots, shelters or dividing strips. Decide for yourself whi...

We have a curved curb with a natural gray color that fits into most environments. Mount on, for example, pavements, refuges, parking spaces and di...

The G-support is often mounted on pavements, parking lots, shelters or dividing strips. This particular product has a concave radius of 3.0m. Use t...

This G-support has a relatively strong swing which is used to construct curves when constructing e.g. sidewalks and parking lots. The product is a...

G-support type A7 convex R1.0 is used for installations with a curve, mainly on sidewalks, driveways, refuges, parking lots and dividing strips. T...

Here we have a natural gray concrete curb with a sharp bend, radius 1.0. Mounted as usual at pavements, parking lots, shelters or dividing strips. ...

This is the product in the A series with the tightest curve. We mainly see this natural gray curbstone on driveways, parking lots, refuges and div...

Stalactite falling from right to left side seen from the front. The glue stone is 10cm high on the right edge, and 4cm high on the left edge. Often...

This variant of G support is mainly used as a transition from A:1 to the variant A:17-7 which is used for car passages. The support has the normal ...

G-support type A which is recessed to 4cm at the right end (the opposite is G-support type A9-4). It is mounted in connection with a recessed pave...

A straight curbstone with a right side countersunk to 7cm. The left side retains the normal height for type A of 10cm (the opposite product is cal...

Here we have a G-support product that is mounted in corners together with other G-supports type A. It is a 90 degree perpendicular corner for oute...

Another concrete curb product to create corners, assembled together with other G-support supports type A. We often see the product along sidewalks...