Pyramidetrappen
"Vejen til en trinpyramide"
Vi har i flere år nu haft en vision om at erstatte vores gamle betontrapper med et bedre og mere sikkert alternativ. Nogle af årsagerne var, at betonen var begyndt at løsne sig flere og flere steder, og børnenes sikkerhed taget i betragtning var det på høje tid at gøre noget ved trappen. Da vi aldrig havde bygget en trappe før, var det ikke helt rigtigt at komme med funktionelle og bæredygtige løsninger. Vi lavede skitser af et par forskellige løsninger og besluttede at tage til Stenbolaget i Järfälla med håbet om, at personalet kunne hjælpe os videre med planlægningen. Vi forklarede vores situation og fik ret hurtigt meget værdifulde tips, der blev afgørende for "Pyramidtrappen". Pludselig var det ikke umuligt at bygge en trappe, og vi tog hjem for at færdiggøre planlægningen. Selvom vi nu vidste, hvordan trappen ville se ud, var det ikke nemt at beslutte, hvilke dimensioner den skulle have. Trappen må ikke være uforholdsmæssig i forhold til huset. Efter nogle beregninger og målinger besluttede vi os endelig for trappens dimensioner. Dimensionerne hvorfor: højden på "Pyramidtrappen", trappetrinnet (hvor du sætter din fod), trappetrinnet (trinnets højde), indvendige og udvendige mål, målene på toppladen. Næste skridt var at forsøge at vurdere, hvor meget materiale der skulle bruges til byggeriet. Hvor mange: murklodser, sække med beton, kilo makadam, meter kabelbeskyttelsesrør, granitplade, sække med fix, samlinger var nødvendige? Efter planlægningsfasen gik vi i gang med nedrivningen af den gamle trappe. Nedrivningen gik ret hurtigt, og vi gemte den knuste beton til senere brug som fyldmateriale. Ved hjælp af en Bobcat blev der derefter gravet en pit, der var omkring 1 m dyb. Vi markerede området, hvor trappen skulle bygges, dækkede området med presenning og fortsatte med at fylde gruben med makadam. Da vi fyldte på med makadam, blev underlaget komprimeret med en jordvibrator.
Da vi var færdige med bærende lag, var det tid til at sætte de første murklodser direkte under indgangsdøren. Målet var at komme op i den rigtige højde foran døren. Vi byggede en ramme som senere med målene på toppladen som var fyldt med beton fra vores gamle trapper. For bedre styrke blev armeringsjern lagt i forskellige lag kombineret med ru beton. Resultatet blev et stabilt trappefundament i det rigtige niveau foran indgangsdøren. Med trappefundamentet på plads kunne vi beregne antallet af trin fra hver side. Udfordringen denne gang var, om vi skulle møde niveauforskellene/gradienten fra op eller ned? Vi besluttede at starte fra toppen med det første skridt.Trappetrinnet, der skulle dækkes med en granitplade fra Stenbolaget, havde mål på 60x30 cm.Indstillingstrinnet skulle være 17 cm, samme stentype men lidt tyndere skulle bruges som beklædning. Der blev bygget en ramme rundt om trappefundamentet og mellemrummet mellem rammen og trappefundamentet blev fyldt med spartelmasse, armeringsjern og ru beton, armeringsjern og beton.Ud fra samme princip blev de øvrige trin bygget og skelettet af "Pyramidtrappen" blev færdiggjort. Vi forberedte også eventuel trappebelysning ved at udlægge kabelbeskyttelsesrør udvalgte steder.
Trappebeklædning
Efter at alle trapperne var bygget, var det tid til at dække trappen med en granitplade. For at få jævne overflader på reposen og andre dele af trappen blev overfladen klargjort med finbeton. For at undgå vandpytter på stenene skulle underlaget hældes lidt. Vi blandede fixet og begyndte at dække landingstrinnet med en granitplade. Den øverste platform blev klædt på først, og vi fortsatte med de andre trin fra top til bund. Udfordringen her var at få flotte hjørner, hvor stenene ville mødes. En lige linje i hjørnerne fra top til bund. At lægge stenene på en måde, der gav trappen symmetri, betød en del savning og inden savning skulle man tænke sig lidt ekstra om. Vi var færdige med at beklæde landingspladsen.
Afslut trappekonstruktionen og begynd det næste projekt
Arbejdet med trappebeklædningen blev fortsat med indstillingstrinnet. På dette tidspunkt havde vi besluttet, hvor trappebelysningen skulle være. Belysningen bestod af i alt 8 LED-lamper. Tre i den yderste ende af de tre nederste trin for at markere enden af trappen, tre i midten af "Pyramidetrappen" og to ved det nederste trin foran indgangsdøren. Med lysene på plads var vi nu færdige med trappebeklædningen. De resterende trin i trappekonstruktionen bestod i at samle og vaske trappen. "Pyramidtrappen" blev endelig færdig!
Da stengangen var tilpasset den gamle betontrappe, besluttede vi at fjerne stenpladerne og dækkede overfladen med færdig græsplæne. Vi ville have en gang, der skulle have samme mål som trappens bredde, men vidste ikke rigtig, hvad formen på stengangen ville være. Vi tænkte, at stengangen kunne have et lignende udseende som en tragt. For at få en sammenhængende overflade mellem stengangen og trappen gravede vi en rektangulær grube foran trappen og langs husets langside. Fra dette rektangel blev der så gravet en 120 cm bred passage med samme dybde mod garageindkørslen. Hele området blev dækket med jorddug, først fyldt med et lag makadam og derefter stenmel. Substratet blev omhyggeligt komprimeret med en jordvibrator. Dernæst blev kantstenene placeret rundt om rektanglet som en ramme og brolægningen begyndte. Det valgte materiale var en kantsten af beton og tumlet jordsten, der blev købt af Stenbolaget. Vi valgte at lægge stenene i en 45 graders vinkel i forhold til hinanden. Efter en del opmåling og skæring blev stengangen afsluttet med fugning. Stengangen blev endelig færdig!
Her var samme slags stenplader som den gamle stengang. Vi fjernede fliserne, dækkede underlaget med stenmel og pakkede med jordvibratoren. Dernæst lagde vi tumlede belægningssten og afsluttede projektet med fugning. Vi valgte her at lægge stenene parallelt med "Pyramidetrappen".
Nogle afsluttede ord
Her er nogle billeder af hele projektet som inkluderer "Pyramidtrappen", stengang fra garageindkørsel og stengang foran huset. Et par afsluttende ord:
Jeg er hverken fliselægger, tømrer eller betonarbejder.
Vi havde en idé til en ny trappe, som vi realiserede. Vejen til vores idé tog næsten tre måneder. Da vi var færdige med at bygge trappen, følte vi, at livet med tre børn, to fuldtidsjob og et stort byggeprojekt var ved at blive for hårdt for familien. Vi besluttede at tage hjælp til at gennemføre projektet.Nogle tips:
Har DU en idé? Tør, tro på dig selv og få hjælp hvis det er nødvendigt!!!!
Planlæg dit projekt nogenlunde, spørg dem der er eksperter, i vores tilfælde var det personalet på Stenbolaget i Järfälla, skitser hvordan byggeriet skal se ud, tag mål og grænser, vælg materialer og hav en vis margin ved køb, planlæg dit projekt igen nu i detaljer med milepæle, start arbejdet, vær realistisk og ærlig over for dig selv, få hjælp når det er nødvendigt, sørg for at projektet bliver gennemført inden for den afsatte tid og budget !
Hvis du vil vide, hvilket materiale der er brugt i projektet, har du listen her:"Pyramidtrapper"Murerblokke 15x19x59 224 stk.
Macadam 11/16 60 poser
Fin beton 45 poser
Granithäll Black Antik 60x30x2,5 købt på Stenbolaget 100 stk Dragon Black Natural Stone 60x30x10 Purchased at StenTfx 54 pcs. jaget på Stenbolaget 13 Sække Murexin Fogbruk Fm 60 Antracit købt hos Stenbolaget 2 pakke 2 pakke >
Stenbander Macadam 11/16 2 tons
Stenmel 0/8 0x140x40 købt på Stenbolaget 1400 stk
Kantsten mini 210x140x140 købt hos Stenbolaget 210 stk
Jeg er hverken fliselægger, tømrer eller betonarbejder.
Vi havde en idé til en ny trappe, som vi realiserede. Vejen til vores idé tog næsten tre måneder. Da vi var færdige med at bygge trappen, følte vi, at livet med tre børn, to fuldtidsjob og et stort byggeprojekt var ved at blive for hårdt for familien. Vi besluttede at tage hjælp til at gennemføre projektet.Nogle tips:
Har DU en idé? Tør, tro på dig selv og få hjælp hvis det er nødvendigt!!!!
Planlæg dit projekt nogenlunde, spørg dem der er eksperter, i vores tilfælde var det personalet på Stenbolaget i Järfälla, skitser hvordan byggeriet skal se ud, tag mål og grænser, vælg materialer og hav en vis margin ved køb, planlæg dit projekt igen nu i detaljer med milepæle, start arbejdet, vær realistisk og ærlig over for dig selv, få hjælp når det er nødvendigt, sørg for at projektet bliver gennemført inden for den afsatte tid og budget !
Hvis du vil vide, hvilket materiale der er brugt i projektet, har du listen her:"Pyramidtrapper"Murerblokke 15x19x59 224 stk.
Macadam 11/16 60 poser
Fin beton 45 poser
Granithäll Black Antik 60x30x2,5 købt på Stenbolaget 100 stk
Stenbander Macadam 11/16 2 tons
Stenmel 0/8 0x140x40 købt på Stenbolaget 1400 stk
Kantsten mini 210x140x140 købt hos Stenbolaget 210 stk