LÆG FLISEGULV TRIN FOR TRIN
At lægge fliser er et kreativt arbejde, som i nogle tilfælde og enklere overflader kan klares på egen hånd. Det er dog vigtigt, inden du går i gang, at du har god planlægning og kendskab til underlaget i dit rum og rum.Også at du samler et godt kendskab til de fliser og den klæber du har tænkt dig at montere.
Der er stor forskel i design mellem både gulv og væg, samt vådt og tørt rum. I fx badeværelser og andre vådrum er der særligt høje krav til, at det forberedende arbejde udføres korrekt, og at der er ansat en håndværker og flisbelægger med vådrumskvalifikationer. Vi anbefaler altid at bruge en certificeret håndværker til vådrumsinstallation!
I vores guide gennemgår vi, hvordan du bør tænke på at udskifte et enklere gulv i et tørt rum, samt de materialer og værktøjer, der skal til undervejs.
Gennem de forskellige trin og find smarte tips til, hvordan du forvandler den almindelige gulvoverflade til et strålende nyt granitkeramisk gulv!
Boligens mest imødekommende overflade
Et eksempel på en gulvflade, som du i nogle tilfælde selv kan ændre, er hallgulvet.
Salen er husets og lejlighedens indgangsparti og det mest indbydende område. At åbne indgangsdøren til sit hjem skal føles behageligt og at blive mødt af et smukt entregulv er hverdagsluksus, når det er bedst.
I hallen tager vi snavsede sko af, våde regnjakker og får en masse sand og grus ind i den kolde og sjatne vintersæson. Hallgulvet er en overflade, der fortjener et rigtig godt materialevalg!
Men hallen er ikke bare et opbevaringsrum, det er også det første man møder og det første indtryk man får af en bolig.
Klinker men frem for alt granitkeramik er et særligt godt valg til hallgulvet. Pladerne kan klart tåle hårdere greb og er både ridse- og spildsikre. Med tanke på den trafik af sko, der foregår på halgulvet, er det et klogt valg at bruge et materiale, der har netop disse to egenskaber.
Med granitkeramik får du et gulv, der er nemmere at vedligeholde end med mange andre materialevalg!
I hallen møder vi sjældent udfordringer med fald eller lignende, som vi direkte møder i badeværelser og vådområder. Sager kan ofte kræve mindre fliser, mosaikker eller tilsvarende for at kunne følge gulvets hældning mod gulvafløbet.
I hallen kan du derfor lege frit med størrelsen og arbejde med præcis det format, du ønsker.
Med en større plade skaber du plads i hallen og får færre fuger på tværs af dit gulv. En mindre gang kan hjælpes af en mindre tallerken til at føles større og have det godt med lyse nuancer og farvevalg for at føles mere luftige. Hallen åbner op for kreativitet og du kan lege frit med både størrelse, nuance og overflade for at finde den helt rigtige til dit hjem. Det vigtige er, at du finder en tallerken og et format, der føles tiltalende, og som falder i din smag.
1. GOD PLANLÆGNING
En stor del af processen ved udskiftning af et gulv er at finde det rigtige materiale, fliser og skygge til dit nye gulv! Et godt tip er at bestille prøveplader for at teste dig selv derhjemme. På den måde får du en bedre fornemmelse af, hvordan dit fremtidige gulv vil blive opfattet under forskellige lysforhold.
Inden du går i gang med selve udførelsen, er det godt, at du har planlagt, hvordan du vil lægge dine klinkerfliser. Hvor mange rækker det tager, og hvor du skal skære og justere dine fliser. Forsøg at undgå for små stykker og skær helst ikke mindre end 1/3 af den mindste side af pladen og kun skær ved siden af vægge og forhindringer. Hvilken fliseskærer du bruger afhænger også af hvilken type flise du planlægger at lægge. Vores granitkeramik er et eksempel på fliser, der har en særlig høj densitet og kan vådskæres for gode resultater. Dette med et skærebord, en maskine og klinge tilpasset specifikt til granitkeramik. Hvis der skal ske en vådskæring af pladen, er det vigtigt at lade pladerne tørre helt op, inden selve montagen påbegyndes. En fugtig plade hæfter dårligere under monteringen.
Man kan også i nogle tilfælde score fliserne i en bedre fliseskærer tilpasset materialet og bryde dem i det ønskede format. Granitkeramik er dog et ekstremt hårdt materiale, og drejningsmomentet er krævende for at opnå et lige snit.
Knækker pladerne giver en takket kant og ikke så glat som ved vådskæring.
Når du så beregner forbruget af dine klinkerfliser, tager du højde for hvor mange rækker du skal bruge ud fra flisernes dimensioner. Tag også højde for, at der tilføjes en fugebredde mellem pladerne. Mulig fugebredde varierer meget afhængig af hvilken type plade og materiale du har tænkt dig at lægge. Til sidst til din beregning tilføjer du 5 procent af det beregnede antal fliser som en spildmargin.
Når du først er i gang, ønsker du ikke at stå uden fliser, når du går videre i din installation.
Du skal foretage justeringer og skære fliserne i næsten alle rum og vinkler. Lad skæringen ende op ad en væg eller et hjørne og gem den så under gulvsoklen. Lad ikke dine afskårne sektioner ligge i almindeligt syn på hverken gulvet eller væggen.
Lægning af fliser og granitkeramik er noget, der forstærker det æstetiske indtryk i boligen, men god planlægning og grundigt forarbejde er to utrolig vigtige faktorer, der skal tages i betragtning.
En anden faktor, du skal overveje, er, hvordan dit nye gulv ender i vater. Husk, at tykkelsen af pladen og fixeringen nedenunder skaber en vis tykkelse. Så find ud af, hvor meget du skal lege med, og hvor tykt dit eksisterende gulv er i dag. Dette for at ende æstetisk korrekt både mod underkant af døre og i overgang med andre gulvmaterialer.
Se også over dine gulvsokler samt beklædning og lister omkring døre. Sokler skal fjernes inden montering, så det nye gulv kan ende under selve soklen.
Hvis gulvvarme har været på plads siden før, er det smart at få hjælp fra en fliselægger. Opvarmede gulve kan lægges på en række forskellige måder, og det er vigtigt ikke at beskadige løkkerne eller det omgivende materiale. Lær din gulvvarme at kende og få hjælp fra en handyman, hvis du har tænkt dig at skifte et gulv med eksisterende gulvvarme.
FÆLLES MATERIALER OG VÆRKTØJ
Granitkeramik da både gulv og væg er et perfekt alternativ til dit hjem, da det er nemt at holde rent, ser godt ud i ethvert rum og er holdbart i længden.
Et korrekt udført arbejde er da noget, du kan føle dig stolt af i mange år fremover.
Når du har tænkt dig at lægge fliser, har du brug for godt værktøj og tilbehør. Alt sammen for et så vellykket resultat som muligt. Vi har listet mange af værktøjerne til en vellykket fliselægning og så du kan lægge dine fliser indendørs uden tilbageslag:
- Fikseringsmiddel i form af fix
- Tandspartel
- Blander
- Spand
- Vandpassage
- Niveauafstandsstykker / Tilkryds / Ledsnor
- Skærebord / Fliseskærer tilpasset dit valg af materiale
- Deltager
- Fællesbestyrelse
- Svamp til rengøring
- Vaskebræt
- Poleringsklud
- Bor/skruetrækker til blanding af fix og tætningsmiddel
At lægge fliser og granitkeramik er et kreativt arbejde, der skaber en dejlig atmosfære i hele hjemmet. Enklere overflader kan ofte laves på egen hånd.
Hvis du derimod skal renovere et badeværelse eller andet vådrumsområde, er den rigtige måde at lade en kvalificeret håndværker gøre arbejdet for at undgå fejl, der kan føre til vandskader. Spørg os på Stenbolaget, hvis du skal renovere dit badeværelse, så kan vi forsøge at hjælpe dig med at finde en god entreprenør.
Læs mere i vores service handverksjälpen.
2. Forbered dit underlag
Forbered overfladen, du skal lægge!
Før selve flisebelægningen kan starte, skal gulvet klargøres og alt gammelt gulv renses væk. Dette er et job, der varierer meget alt efter, hvad der var der før, og hvordan overfladen ser ud. Er det et gammelt trægulv, fjernes dette ofte uden problemer. Men det er ikke sikkert, at underlaget er rent og tilstrækkeligt forberedt til at kunne lægge klinkerfliser på.
Hvis det er fliser, der skal udskiftes og udskiftes med fx granitkeramik, skal hver flise renses væk for at få en jævn overflade, hvorpå der kan lægges nyt gulv.
Vær forsigtig, hvis du har gulvvarme før, og sørg for, hvordan dette installeres. Gulvvarme kan installeres på en række forskellige måder og er nogle gange indlejret i flydende afretningslag, og det er vigtigt ikke at beskadige dette materiale. Tag hjælp af en håndværker, hvis du har tænkt dig at skifte et gulv med eksisterende gulvvarme.
Et korrekt underlag til at montere granitkeramik og fliser på skal være jævnt og glat samt renset/vasket og helt fri for løse materialer og rester.
En almindelig metode, såsom tyndbedsteknik med et cementbaseret klæbemiddel, kan udføres på forskellige typer konstruktioner.
De materialer du kan montere på og selve underlaget skal bestå af et dødt materiale, der ikke risikerer bevægelse i fremtiden.Et eksempel på et materiale er beton. Mange gulve, det være sig fliser eller trægulve, har ligget på netop et støbt underlag siden før.
Find ud af, hvordan forholdene ser ud for din overflade og konstruktion, inden du går i gang!
Primer giver vedhæftning
Inden selve fliserne monteres og fikseringen trækkes over overfladen, er det godt at bruge en primer. En primer anvendes som et ekstra fundament og giver fliserne en bedre vedhæftning til underlaget. Et rent betonfundament og flydende gulv kan nogle gange være glade. I disse tilfælde fungerer primeren som et supplerende fundament og giver en mere ru overflade, som fixeringen kan klæbe til.
FLIS KRYDS ELLER NIVEAU AFSTAND
Pålægning af fliser kan udføres med forskellige fugebredder. Det mest almindelige er at bruge en afstand på 1-7 mm men det er forskelligt alt efter hvordan flisen ser ud og hvad man personligt ønsker. Nogle fliser anbefales med en vis fugebredde, så det er godt at se på hvad der gælder for de fliser du har valgt. Vælger du at lægge fliser med bløde kanter, får du en bredere fuge, end hvad skarpe kanter giver.
Granitkeramik er et eksempel på skarpe fliser, der kan lægges med en meget smal fuge! Med en lille fuge og en skærm på fugen, der er så tæt på pladen som muligt, får du en diskret fugelinje og undgår et gulv og vægge, der føles ternede.
For en pæn og jævn flisebelægning, hvor fliserne holder samme fugebredde, anbefaler vi, at du anvender enten flisekværs eller niveauafstandsstykker.
Flisekryds giver bestemt en fast fugebredde, men planafstanden er værd at være ekstra opmærksom på!
Niveauafstanden sikrer både at fugebredden holdes jævn, og at du medbringer fliserne ned til niveau og sikre, hvor glat overfladen bliver på dit gulv.
Det lille, men uvurderlige tilbehør letter installationen og gør den smidig gennem hele projektet.
Hvis du skal lægge granitkeramik på gulvet eller blot lægge fliser på væggen, er det pænt at sætte dem, så fugerne mødes i en linje. Du vælger selv hvilket mønster du vil montere i.
Plader i lige installation eller en bestemt forbindelse. 3/4 del dressing eller tredje dressing foretrækkes, hvis der ønskes en dressing. Halvfuger bør ikke monteres på plader i formatet 60x30 og større, dette for at undgå fugespalter.
Tjek hvilke anbefalede monteringsmønstre, der findes for de fliser, du har til hensigt at montere.
3. Saml trin for trin
Når du er klar til at begynde at lægge fliser, skal du blande fikseringsmassen og få fixet til den rigtige konsistens. Brug en maskine og en rørestav til en jævn blanding.
Arbejd fixeringen grundigt for at sikre, at alt tørt pulver er blandet, og at dit fix ikke indeholder klumper. Bland altid i en helt ren spand for at undgå en dårlig og svær at arbejde, og gå altid ud fra de anbefalinger, der er tilgængelige for dit unikke klæbemiddel. Denne information er ofte tilgængelig i form af produktblade og kan læses på selve posen.
Det er vigtigt at følge installationsrådene for den valgte løsning, da forskellige produkter har forskellige egenskaber.
Korrekt blandingsforhold
Find den rigtige konsistens
Anvend rettelsen for korrekt dækning
Sæt derefter dit fix på gulvoverfladen, hvor du vil lægge dine første fliser. Udarbejd fixet med en spartelmasse. Tandspartel bygger villaer som man så lægger mursten imod. Valget af tandfyldstof og hvordan du kæmmer kan spille en stor rolle for fremtidige resultater. Tandspartel fås med både lige og runde takker og i en række forskellige dimensioner. Valget af tandspartel spiller en stor rolle og er en faktor, der kan bestemme dækningen af dine fliser. Det er dimensionen mellem tænderne og højden på tænderne, der bestemmer, hvor meget fix der fordeles og med andre ord giver en fastgørelsesflade.
Det er meget vigtigt at have den rigtige mængde lim under fliserne. Træk tandspartelen gennem fixeringen og byg lige riller, så luften kan rejse ud, og pladen kan gå ned for at opnå en god dækning nedenunder.
Installer pladerne ved at skubbe dem forsigtigt frem og tilbage i fikseringsmassen for dels at finde niveau mellem de forskellige monterede plader, men også for at arbejde pladen ind i rillerne for at få fuld dækning. Foretag stikprøver hist og her ved at løfte pladen igen for at se på undersiden under monteringen for at sikre dig, at du fik det rigtigt og ikke kom på afveje.
Det er vigtigt at være forsigtig med trinene, så dit klinkegulv og granitkeramik sidder ordentligt og ikke risikerer at falde.
Arbejd med små områder ad gangen, da klæbemidlet ofte tørrer hurtigt. Vær omhyggelig med at måle med vaterpas for at få en så glat overflade som muligt. Mål ofte og omhyggeligt under hele samlingen.
Nogle fliser kræver mere af underlaget og udførelse. Hvis du har tænkt dig at montere større plader, skal du muligvis også lægge lim på undersiden af pladen. Rygstrygning bør foretages på større plader for lettere at opnå fuld dækning. Dette gør undersiden af pladen mere forberedt, når den placeres på den kæmmede overflade, og til at fuld kontakt lettere opnås.
SÆT UDGANGSPUNKT MIDT I RUMMET
Et tip er at tage udgangspunkt i den overflade, der er mest synlig og den visuelle del af dit værelse. I nogle tilfælde er det midt i rummet, ellers start fra en lige væg og arbejd dig fra siden af rummet og mod døren, så du ikke lukker dig inde. Sørg for, at linjen er lige ved for eksempel at snore en snor mellem væggene eller bruge et laserpas. Planlægningen i hvordan du placerer dine fliser og fliserækker har stor betydning for det mest mulige æstetiske resultat.
Brygstryg eller dobbeltlim fliserne med dit klæbemiddel, hvis det er nødvendigt, og tryk fast, så flisen sidder godt fast mod fikseringen med fuld dækning. Hvis du bruger flisekryds, så lad dem blive mellem fliserne før fugetrinnet. Selv kiler skal ofte monteres mod væggen, da disse sjældent er helt lige. Det vigtige er, at du tager udgangspunkt i dit læggemønster, og at du får fuger, der løber jævnt over hele overfladen.
Granitkeramik, hvis fliser bærer smukke mønstre
4. FUG NÅR GULVET ER TØRT
Efter ca. 1-2 dage er fixeringen tørret fuldstændigt, og du kan derefter gå på overfladen uden at beskadige din overflade og flisebelægning. Sørg dog for at holde øje med tørretiden for din valgte lim for at træde overfladen på det rigtige tidspunkt.
Overfladen skal være helt tør og hærdet, for at du kan samle dit gulv.
Rengør først samlingerne for eventuelt resterende klæbemiddel, før du starter. På denne måde kan du sikre dig, at din fugemasse går ned til bunden af fugen.
Bland fix og fuger derefter i henhold til pakkevejledningen med maskine og røremaskine i en ren spand. Fugen påføres herefter med fugebræt diagonalt hen over fugerne, så de fyldes ordentligt. Vent derefter 30-60 minutter og rengør overfladen med en svamp og vand. Brug gerne et vaskebræt til jævnt tryk med svampen, når du flytter den hen over overfladen. Skyl svampen ren og skift vandet mange, mange gange, så din gulvoverflade er helt ren. Gentag processen, indtil du opnår et flot resultat. Hvis du kommer til at beskadige en fuge, kan du nemt tilføje ny fugemasse på dette stadium, men undgå fugning, når din fuge allerede er hærdet.
Afslut med en slutrengøring med en pudseklud, når fugerne er tørret helt op.
I mellemrummet mellem gulv og væg og omkring rør og lignende anvendes en blød fuge/silikonebaseret fuge.
Jeg håber, at du nu har en bedre indsigt og viden om de trin, der finder sted ved fliselægning af klinker og granitkeramik
Held og lykke!